Waterproofing
Protect Your Investment.
There are approximately 40 million masonry chimneys in North America and the most common problem with these structures is water penetration. Water causes over 1 billion dollars in damage annually in the form of staining, loss of insulation value, freeze-thaw damage, deterioration, and ultimately structural failure.
All new and existing masonry chimneys are susceptible to water damage and, even if repaired, chimneys will continue to deteriorate if they are not protected. ChimneySaver®, which comes with a 10 year warranty, is the first water repellent specifically developed to protect chimneys from the severe weather conditions to which they are exposed.
ChimneySaver® is a WATER REPELLENT- not a water sealer. The difference could save you hundreds, or even thousands of dollars in repairs because sealers can actually damage masonry. Unlike waterproofing sealers that remain on the surface and trap water vapors, ChimneySaver® penetrates deep enough to protect masonry from destructive water penetration.
Water Damage Can Be Prevented.
Chimneys are highly exposed to the elements and, if left unprotected, are susceptible to structural deterioration. It is important to address this problem before serious damage occurs.
Severe spalling and deterioration caused by water penetration. Efflorescence stains caused by water penetration and leaching salts are unsightly and add to deterioration. Water penetration and freeze/thaw damage result in loss of insulation value and lead to structural failure.
Superior Technology.
ChimneySaver® contains patented siloxanes small enough to penetrate most masonry pores up to 1/4 or more. These special siloxanes form strong bonds with the silica in masonry and concrete. Because of this bonding process, one application of ChimneyS aver provides up to ten times the water repellent protection of typical sealers.
100% Breathable.
Moisture from a variety of sources is always present in masonry and concrete. Sealers and silicone coatings form a water resistant surface film which traps water Sealel's vapors. If these vapors cannot escape, they will contribute to spalling, scaling, deterioration, and freeze-thaw damage. ChimneySaver® is 100% vapor permeable - a non film- forming water repellent that penetrates and lines masonry pores. ChimneySaver® offers the best protection because it releases water vapors and effectively reduces water absorption.
Superior Value.
The superior value and added benefits of protecting your masonry with ChimneySaver® are obvious when comparisons are made with popular retail brands of water sealers.
| Siloxane | Warranty | Initial Application | 100% Breathable | Best value | ||
| ChimneySaver® | ||||||
| Brand "T" | ||||||
| Other Brands |
Long- Term Protection.
ChimneySaver® is an investment in long-term protection that will help prevent expensive reconstruction. No water repellent, however, is a substitute for good construction and workmanship. The first step in pre venting water damage is to make necessary repairs to structural cracks, damaged crowns, flashings, deteriorated bricks, and mortar joints. The second step is to protect porous masonry from further water penetration by applying ChimneySaver® water repellent.
Protection is especially needed when a new chimney liner has been installed. If repairs and preventive measures are not taken, the old chimney will continue to deteriorate around the new liner.
Use On All Masonry Surfaces.
Not just for chimneys, ChimneySaver® water repel lent is the ideal choice for protecting all residential and commercial above-grade masonry. ChimneySaver® is the best solution for a variety of exterior masonry applications including, patios, walkways, pool decks, and wall systems.
