At Safeside Chimney, we recently completed a comprehensive chimney restoration project for a homeowner in Sandy Hook, CT. This job involved a rebuild of the existing block chimney from the roofline up with all new brick , that better matched the homes aesthetics while addressing the structural issues and potential fire hazards.
The inspection revealed multiple problems that required immediate attention to ensure the homeowner’s safety and to preserve the home’s integrity. From damaged flue tiles to dangerous creosote buildup, we tackled every challenge head-on with expert craftsmanship and attention to detail.
Chimney Leak Repair in Sandy Hook, CT
During our Level 1 chimney inspection, we identified multiple signs of active water intrusion. The chimney crown had large fractures and was beginning to lift, allowing water to enter and accelerate damage. There were apparent homeowner style spot repairs in past that have since failed. The mortar joints were open, and the galvanized caps were deteriorated beyond repair. In addition, someone had previously attempted a patch job using porous cement, which only worsened water absorption and contributed to further degradation during New England’s freeze-thaw cycles.
To correct these issues, we completely removed the chimney structure down to the roofline. We rebuilt it using high-quality SWB brick and new cement. All new flashing was installed and properly tucked into the brickwork for a long-lasting, watertight seal. We also replaced both chimney caps with stainless steel models for maximum durability.
Stage 3 Creosote Removal in Sandy Hook, CT
One of the most critical safety concerns we discovered was a thick Stage 3 creosote glaze. This hard, dense, and highly combustible buildup cannot be removed through standard sweeping methods. Its presence significantly increases the risk of chimney fires and impairs the functionality of the venting system.
We resolved this by removing the top flue tiles and rebuilding the flue stack with properly cemented joints. By addressing the glaze at the root, we ensured safer and more efficient operation for both fireplace systems.
Chimney Deglaze in Sandy Hook, CT
The chimney deglaze process involved careful dismantling of the damaged flue liner and replacing it with new, correctly sized flue tiles. This step was vital to eliminating the creosote glaze and restoring safe airflow within the chimney.
In the final phase, we reconstructed a new cement crown with a proper two-course drip edge and installed all-new black stove connector piping inside the home. Every detail was handled by our in-house team — no subcontractors — allowing us to maintain strict quality control and a clean job site throughout the process.
If you’re experiencing chimney leaks, damaged masonry, or suspect creosote buildup, don’t wait until it’s too late. Contact Safeside Chimney for trusted chimney leak repair and stage 3 creosote removal in Connecticut.
