An older stone chimney in Manchester, CT suffered severe structural damage after a major storm. A large section of the upper chimney had fallen onto the roof, while additional loose masonry remained unstable above a second-story area.
Assessing the Chimney Damage
The storm exposed the seriousness of the deterioration. A substantial portion of the chimney had already fallen, while other loose stones remained capable of falling with another strong gust of wind. The potential fall zone included a second-story deck, exterior gas lines, and areas used by the building.
During our inspection, we found extensive deterioration throughout the original stone chimney. Decades of rain, snow, moisture absorption, and repeated freeze-thaw cycles had weakened the stone, mortar joints, and crown.

Why a Partial Repair Was Not Enough
The damage extended beyond the portion that had visibly fallen. The chimney’s age, prolonged moisture exposure, and widespread masonry deterioration made a limited repair an unreliable long-term solution.
Rather than rebuilding only the section above the roof, we recommended removing the existing chimney down to its footing below grade. This approach allowed us to address the deteriorated masonry at its source instead of leaving an aging structure beneath a new upper section.

Rebuilding the Chimney for Long-Term Performance
We completed a full ground-up chimney rebuild using new severe-weather brick and rebuilt the structure to its original height. Although the original chimney used stone, we selected brick for the reconstruction to provide a practical, durable replacement.
We also rebuilt the interior flue system with new clay flue liners for the gas-fired appliances serving the building. The rebuild included the areas around the fireplace and smoke chamber that required reconstruction as part of restoring the chimney.
At the roofline, we installed new lead counterflashing to create a proper weather-resistant connection between the chimney and roof. We also constructed a two-brick corbeled drip edge beneath the new cement crown to help direct water away from the masonry.

A Complete Chimney Restoration
This project required much more than replacing the masonry that had fallen during the storm. We addressed the underlying structural deterioration, replaced the damaged chimney components, rebuilt the flue system, and restored the chimney from its foundation to its crown.
The completed chimney provided a sound, weather-resistant structure while restoring the property’s original appearance and preserving safe venting for the building’s heating appliances.













