Building a fire in your fireplace sounds simple enough, but sometimes it can be tricky. If you don’t do it correctly, then you will be trying to light it again and again. Before you begin to start your fire in your fireplace, then gather all the things first. You will need different sizes of wood, twigs and fireplace matches. The fireplace should be at room temperature before you start your fire. Open the doors of the fireplace around thirty minutes before you plan on lighting your fire.
The damper needs to be open. This will give the fire air to get started properly. The damper controls the air and flow through the flue. It also prevents any smoke from coming into the home. Put your kindling and small twigs on the grate before you start placing your wood. Add just a bit of rolled up newspaper. This is what you will light so the kindling and wood will light. Criss-cross the wood on top of the kindling. This will allow the smoke to travel through the wood and upwards through the flue.
You are ready to light the fire now. Once you have the fire lit, then check the smoke. If the smoke is black and thick, then you should arrange the logs. The fire is starting to lack oxygen and by arranging the logs with a poker will give the oxygen that the fire needs. Once the smoke is barely noticeable, then the fire is doing well and nothing needs to be done to the fire now.
The fire should be going good now and you can enjoy the warmth that it is bringing to your home. Make sure that the fire should be put out thirty minutes before you plan to go to bed. You can take the poker and rearrange the logs so the fire embers will burn out. It is easy to start a fire in the fireplace. Never forget to be safe with the fireplace and the fire. This will keep your family and home safe and warm on cold winter nights.
Fore more information on Connecticut’s top chimney service, click here.